Upgrade guide Based on Maruzen type 96

[Vulcan Raven]

Re: Upgrade guide Based on Maruzen type 96

guard-sniper87 banned!?

adjusted my stock hop unit finally and reaching around 60m with .30's which is superb. For a full stock system to have pin point accuracy and reach those distances not to mention a hefty FPS. £130 well invested.

[Vulcan Raven]

Re: Upgrade guide Based on Maruzen type 96

I'll pick up some .36 as well then and save the .43 for windy days.

[guard-sniper87]

Re: Upgrade guide Based on Maruzen type 96

Badas, on the aps system mate use a pdi.04

also use this on a l96 with .4s using an hp unit or pdi you will notice a hell of a better accuracy and consistancy

also on a stock rifle with a few tweaks that are on the very first post on this thread
the heaviest ammo will be .36 as badas said and will be accurate out to about 50max then will drop off

use .3s at the moment to get a little bit more range but you will need to put one or more rounds down range to hit them

[badas]

Re: Upgrade guide Based on Maruzen type 96

your bb's are too heavy too and hop yes

you want to be usingh 0.3's / 0.36's at utter most on a stock l96

[Vulcan Raven]

Re: Upgrade guide Based on Maruzen type 96

I seem to have trouble with range. My shots are dead straight but can't seem to reach 100ft+

Currently running a stock Warrior L96 using .43's

I'm guessing it has something to do with my hop, maybe not adjusted very well?

[badas]

Re: Upgrade guide Based on Maruzen type 96

hmmm i kinda like my 0.4g bb's :/

A know what barrels to normally use etc for an L96 and a Gspec but this guns a little different kinda because ive never owned an aps2 before i suppose.

Ive only been using the 6.01 as it came with the gun but at the moment im getting over 80 metres easily on every shot but the accuracy of each shot can never be 100%. Will try the new hop rubber as its free first and take it from there.

[The Dr]

Re: Upgrade guide Based on Maruzen type 96

Awesome guard sniper to the rescue once again

[guard-sniper87]

Re: Upgrade guide Based on Maruzen type 96

Use a .04 for pdi badas

And use madbull .03 as gave best results lads

[The Dr]

Re: Upgrade guide Based on Maruzen type 96

Oh awesome I'll get the red shark one that's 60 degrees. Better than using the one that came with my JG AK47.
Barrel use 6.03 or 6.05. 6.01 doesn't give range like the 6.03 would in a sniper.
Ric

[badas]

Re: Upgrade guide Based on Maruzen type 96

with what inner barrels?

im using a PDI 6.01 at the moment but considering trying to source a 6.03 alternative

[guard-sniper87]

Re: Upgrade guide Based on Maruzen type 96

Yes mate guarenteed good performance I used them in every l96 I have used

Also tried a hard firefly and wasn't upto par with it

[badas]

Re: Upgrade guide Based on Maruzen type 96

so using a madbull red shark hop rubber and its provided black H nub is a guarenteed good performer?

got one laying arround here im considering using in my ASP2 with hex hop chamber :/

[guard-sniper87]

Re: Upgrade guide Based on Maruzen type 96

Vulcan get the pss96 spring as will slip right in without needing to buy a new sized spring guide and pistol etc

basically the red shark hop rubber is the best result giving hop rubber

the guarders are good but not effective using heavy ammo such as the .40/.43 ,

[Vulcan Raven]

Re: Upgrade guide Based on Maruzen type 96

I'm going to pick up a Laylax 150 spring from Z1.

Do I get the PSS2 or the PSS10?

[badas]

Re: Upgrade guide Based on Maruzen type 96

Yeah ive heard good reviews on the guarders :/

Madbul hop rubber can be great but also now been experiencing people having issues withit in certain hopup chambers with bb's not feeding propperly.

It works well in my M14 delviering excellent range and consistency but i wouldn't like to run it in my sniepr rifle as a friend of mine has just had pure hastle with his recently in a stock G36 hop though :/